Roof-mounted universal antenna base with integrated active GNSS antenna
COMBISAT® MOUNT
Roof mounted universal antenna base with built-in active GNSS antenna. The base accepts mobile antenna whips with external M5 threaded stud. M5/M6-adapter for optionally mounting of antenna whips with internal M6 thread is supplied
- FOR NAVIGATION AND TRACKING PURPOSE
- LOW PROFILE DESIGN
- NON-CORROSIVE
- TILTABLE EXTERNAL ANTENNA WHIP
- Frequency
- 0 - 2500 MHz, 1561.1 - 1605.4 MHz (External antenna whips/ GNSS)
- Impedance
- 50 ohm (All)
- Satellite system
- GLONASS, GPS, Galileo and BeiDou
- Polarisation
- RHC (Right Hand Circular)(GNSS)
- LNA Gain
- 26 dB (GNSS)
- Noise figure
- 1.35 dB (GNSS)
- Supply Voltage
- 3 - 5.5 V DC (Fed via cable) (GNSS)
- Current consumption, average
- 20 mA (GNSS)
- Color
- Black
- Weight
- 150 g
- Mounting
- Bolt-on (From inside only - Maximum torque on nut 4.5 Nm)
- Mounting Instruction
- On horizontal metal surface (Vehicle roof etc.)
- Mounting Place
- The antenna whip (not supplied) is tiltable 15° in all directions by bending the topsection of the base. NOTE! Bending one time only !
- Height above root
- 30 mm
- Mounting hole
- Ø 18 - 22 mm
- Build-in Depth
- Approx. 11 mm
- Materials
- ABS, POM, PE, PCB, brass and steel
- Operating Temperature
- -40C to +70C
- Connector
- GNSS: FME-male (Blue)
- Connector2
- External antenna: FME-male (Black)
- Cable
- 150-200 mm
- Dimension
- 81 x 55 mm
- Ingress protection
- IP65 (When mounted)
- G40001IP
- Bulk packing
- G40001
- Individually packing in Polybag
- Type
- Bulk packing or individually packing in Polybag (See "Part No.")
Disclaimer
Scan Antenna reserves the right to change product specifications and information without prior notice. All rights reserved.
