Three in One Low Profile Multiband Antenna (Cellular/WLAN/GNSS)

CA01-1524035M

00Product description

Roof mounted three in one combination antenna with Cellular, WLAN and Active GNSS Antennas. High quality low profile construction designed for through hole mounting.

Multiple bands in one installation:

  • Cellular

GSM/UMTS/LTE/5G NR

  • WLAN
  • GPS and Galileo
01Electrical specifications
Type
Combination Antenna
Frequency
790 -960 MHz, 1710 - 2690 MHz (Cellular) / 2400 - 2485 MHz, 5250 - 5850 MHz (WLAN) / 1574.42 - 1576.42 MHz (GNSS)
Bandwidth
See "FREQUENCY"
VSWR
≤1.8:1 (Cellular, WLAN)
Impedance
50 Ohm
Satellite System
GPS and Galileo
Polarisation
Vertical (Cellular, WLAN), Right Hand Circular (RHC) (GNSS)
Gain
1 dBd, 3.15 dBi (Cellular, WLAN)
Max. Input Power
10 W (Cellular, WLAN)
LNA Gain
27 dB
Noise Figure
1.5 dB
Supply Voltage
2.3 - 5.5 VDC
Current Consumption, Average
8.6 mA @ 3.0 VDC / 16.6 mA @ 5.0 VDC
02Mechanical specifications
Color
Black
Weight
150 g
Dimensions
Ø 80 x 68 mm
Mounting
Bolt-on
Mounting Hole
Ø 17 mm
Mounting Place
On vertical or horizontal surfaces (conductive or non-conductive). E.g. car roofs, metering cabinets and brackets
Materials
PC, aluminum, brass, copper, PCB, PE
Operating Temperature
-30 to +85ºC
Connector
FME-female (Cellular), SMA-female-RP (WLAN), SMA-male (GNSS) / Other types available on request
Cable
CLF200 (Cellular, WLAN), RG-174 (GNSS) / See length in 'ORDERING INFORMATION'
Serial No.
On product label
03Ordering information
CA01-1524035M/1
Antenna with 1.0 m cables - In bag
CA01-1524035M/2
Antenna with 2.0 m cables - In bag
CA01-1524035M/5
Antenna with 5.0 m cables - In bag
CA01-1524035M/10
Antenna with 10 m cables - In bag

Disclaimer

Scan Antenna reserves the right to change product specifications and information without prior notice. All rights reserved.

Product finder

You Might Also Like