Electrical specifications
Frequency
Cellular: 698-790 / 790-960 / 1710-2690 / 3300-3800 MHz
Impedance
50 Ohm
Vswr
<4.0:1 (698-790 MHz)
<3.0:1 (790-960 MHz)
<1.5:1 (1710-2170 MHz, 2300-2690 MHz
<2.0:1 (3300-3800 MHz)
Measured with 2.0 m cable
Satellite System
GLONASS, GPS, Galileo and BeiDou
Polarisation
Cellular: Linear
GNSS: RHCP
Gain
0 dBd, 2.1 dBi (698-960 MHz)
1 dBd, 3.1 dBi (790-960 MHz, 1710-2170 MHz)
3 dBd, 5.1 dBi (2300-2690 MHz, 3300-3800 MHz)
Max. Input Power
10 W
LNA gain
26 dB (GNSS)
Noise Figure
1.35 dB (GNSS)
Supply voltage
3 - 5.5 V DC (Fed via cable) (GNSS)
Current consumption, average
20 mA (GNSS)
Antistatic Protection
Direct Ground (DC-short)
Mechanical specifications
Color
Black
Height
46 mm (Above surface when mounted)
Weight
160 g
Diameter
Ø 111 mm
Mounting
Through Hole Mounting (Adheisve and Magnetic available)
Mounting Place
On vertical or horizontal surfaces (conductive or non-conductive). E.g. car roofs, metering cabinets and brackets
Mounting hole
Ø 16 - 17 mm
Build-in depth
Max. 15.6 mm
Materials
ABS, silicon, brass, PVC, PE and PCB
Operating Temperature
-40°C to +85°C
Connector 1
Cellular (Red): SMA-male (Other types available)
Connector 2
GNSS (Blue): SMA-male (Other types available)
Cable
RG174/U
Ingress protection
IP67 (when mounted)
Ordering information
48102-001
2.0 m cable + SMA-male - Through Hole Mounting
Packaging information
Type
Bulk paking or individually packing in Polybag (See "ORDERING INFORMATION")
Disclaimer
Every effort has been made to ensure the accuracy of the information in this product sheet. Scan Antenna reserves the right to introduce changes to this information without notice.
All rights reserved.